Cylinder Components and Raw Material

Call MAKI for pricing and availability. Measurements are in inches.

Specialty materials are available on custom order.

Glands Updated 2.jpg

GlandS

Glands machined from ductile Iron are available.

Threaded or Non-Threaded Glands – 2.00 to 11.00

Telescopic Glands – 2.50 to 9.75

Flange Style Glands – 3.00 to 5.00

Pistons Updated 2.jpg

PISTONS

Pistons are machined from ductile Iron, including single and double acting telescopic and thread-on pistons.

Pistons – 1.50 to 6.50

Single Acting Telescopic – 2.50 Bore to 9.75 Bore

Double Acting Telescopic – 2.50 Bore to 9.75 Bore

Thread-On Pistons – 8.00 to 11.00

Mounts Updated 2_edited.png

MOUNTS

Clevis and cross tube cylinder mounts available in cast steel and ductile iron.

Cast Steel Base/Clevis – 2.00 to 4.00 bore

Cast Steel Base/Cross Tube – 1.50 to 4.00 OD bore

DOM Round Steel Tubing Cross Tube – 1.25 OD to 2.00 OD

Cast Ductile Iron Clevis – 1.25-12 UNF

Ports Updated.jpg

PORTS

A variety of ports are available.

ORB Ports – #4, #6, #8, #10, #12, #16

NPTF Ports – 0.125 to 1.000

JIC Port – 0.500

Port Blocks – ORB (#6 and #8) and NPTF (0.500 and 0.750)

Pins Updated 3.jpg

PINS

Pins and retainers are available. Pins are grooved, drilled and zinc plated.

Pin - 1.000 Diameter x 2.250 UL

Pin - 1.000 Diameter x 2.875 UL

#9 Internal Hitch Pin Clip

#14 External Hitch Pin Clip

Shafting Updated 2.jpg

SHAFTING

Prepared shafting is available from 3/8” diameter to 5” depending on the finish. Various finishes available include chrome plated cold drawn, chrome plated hot rolled, induction hardened chrome plated cold drawn, nitrobrite hot rolled and polished, nitrosteel hot rolled, and stainless-steel chrome plated.

Chrome-Plated (Cold Drawn) 1045/1050V – 0.375 to 0.500 Diameter

Chrome-Plated (Hot Rolled) 1045/1050V – 0.625 to 5.000 Diameter

Chrome-Plated (Hot Rolled) SW115 – 1.500 and 2.000 Diameter

Chrome-Plated (Hot Rolled) SW85 – 4.500 Diameter

Induction Hardened Chrome-Plated (Cold Drawn) 1045/1050 – 1.000 to 3.000 Diameter

Nitrobrite (Hot Rolled, polished Nitrosteel) 1045/1050V – 1.000 and 1.500 Diameter

Nitrosteel (Hot Rolled) 1045/1050V – 1.250 to 4.000 Diameter

Stainless Steel Chrome-Plated ASTM A564 – 1.000 Diameter

Stainless Steel Chrome-Plated ASTM A582 – 1.000 Diameter

Tubing Updated.jpg

TUBING

Mechanical and honed tubing are available from 0.75" OD to 8.00 OD and a range of ID’s depending on the type of material. Materials available include a range of steel options.

Drawn Over Mandrel Steel 1026/St52.3 – 0.75 OD to 8.00 OD

Honed Drawn Over Mandrel Steel 1026/St52.3  – 1.00 ID to 9.00 ID

Cold Drawn Seamless Steel 1020/1026 – 3.00 to 8.50 OD

Honed Cold Drawn Seamless Steel 1020/1026 – 6.00 ID

Hot Finished Seamless Steel 1026 – 7.00 OD to 9.00 OD

Hot Finished Seamless Steel AISI 4140 – 9.00 OD

Honed Hot Finished Seamless Steel AISI 4140 – 2.00 ID

Stock Bars Updated 3.jpg

BAR Stock

Raw stock bars are available in a range of shapes and sizes.

Drawn Over Mandrel Steel 1026/St52.3 – 0.75 OD to 8.00 OD

Honed Drawn Over Mandrel Steel 1026/St52.3  – 1.00 ID to 9.00 ID

Cold Drawn Seamless Steel 1020/1026 – 3.00 to 8.50 OD

Honed Cold Drawn Seamless Steel 1020/1026 – 6.00 ID

Hot Finished Seamless Steel 1026 – 7.00 OD to 9.00 OD

Hot Finished Seamless Steel AISI 4140 – 9.00 OD

Honed Hot Finished Seamless Steel AISI 4140 – 2.00 ID